Glass Door Handle Installation Steps

Whether the glass door handle is properly installed affects the aesthetics of the glass door, so how to install the glass door handle by yourself? The specific steps are as follows, for consumers' reference:

1. Glass glue. Before installation, a little glass glue should be applied to the insertion part of the handle to prepare for subsequent assembly;

2. Punch holes. When installing the glass door handle, attention should be paid to whether the holes are properly punched. The criterion for determining whether the hole is appropriate is: the handle connection part should not be too tight when inserted into the hole, and a certain space should be maintained, but it should not be too loose. If it is too loose, the insertion part can be wrapped with tape to adjust;

3. Assembly. When assembling, make sure that the root of the handle is tightly attached to the glass, and then compress the fixing screw to ensure that the handle will not loosen;

4. Inspection. After the above steps are completed, the handle should be turned moderately and gently pulled in four directions to check whether the handle is fixed in the correct position in the hole, and at the same time, ensure that the glass and the handle are well fixed to prevent the handle from falling off or deforming.